{"product_id":"bently-nevada-330901-00-36-10-11-05-3300-nsv-proximity-probe","title":"Bently Nevada 330901-00-36-10-11-05 3300 NSv Proximity Probe","description":"\u003ch2\u003eBently Nevada 330901-00-36-10-11-05 3300 NSv Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330901-00-36-10-11-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330901\u003c\/strong\u003e proximity probe, operates as a dedicated hardware component for shaft-relative displacement measurement within 3300 NSv eddy-current monitoring systems. It provides a calibrated analog displacement signal derived from eddy-current interaction with metallic targets.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330901:\u003c\/strong\u003e 3300 NSv proximity probe, 1\/4-28 UNF thread, without armor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00:\u003c\/strong\u003e Unthreaded length option (0.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36:\u003c\/strong\u003e Case length of 3.6 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10:\u003c\/strong\u003e Total cable length of 1.0 m (approx. 39 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11:\u003c\/strong\u003e Miniature coaxial ClickLoc connector with protector, FluidLoc cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e05:\u003c\/strong\u003e CE marking with hazardous-area \/ regional approvals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/th\u003e\n\u003ctd\u003e330901-00-36-10-11-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/th\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eU.S.A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eNot specified (shipping weight not provided)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eCase length 3.6 in; unthreaded length 0.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating Temp\u003c\/th\u003e\n\u003ctd\u003eNot specified in provided data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Consumption\u003c\/th\u003e\n\u003ctd\u003ePassive eddy-current probe; powered by proximitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread Type\u003c\/th\u003e\n\u003ctd\u003e1\/4-28 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable Length\u003c\/th\u003e\n\u003ctd\u003e1.0 m FluidLoc cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCable Type\u003c\/th\u003e\n\u003ctd\u003eCoaxial, fluid-blocking design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc with protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAgency Approval\u003c\/th\u003e\n\u003ctd\u003eCE and multiple hazardous-area approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCore Performance\u003c\/th\u003e\n\u003ctd\u003eEddy-current displacement measurement calibrated for NSv systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-current Scaling and Gap-voltage Stability\u003c\/h3\u003e\n\u003cp\u003eThe 330901 NSv probe maintains calibrated eddy-current scaling across its linear operating range when paired with NSv proximitor modules. Standard -10 VDC gap-voltage validation ensures correct biasing and confirms probe-to-proximitor matching during commissioning. The FluidLoc cable design prevents fluid ingress along the cable path, preserving coaxial impedance and reducing susceptibility to induced noise. ClickLoc connector shielding suppresses cross-talk between adjacent vibration channels, improving rotor-dynamics phase correlation when multiple probes are installed around the same shaft.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can the probe be disconnected while the proximitor remains energized?\u003c\/strong\u003e A: This is not recommended. Removing the probe under power can generate transient gap-voltage disturbances. De-energize the monitoring channel before replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does the FluidLoc cable influence displacement calibration?\u003c\/strong\u003e A: Cable type and length are part of the matched probe-extension-proximitor system. Any change in cable impedance or length alters calibration and should not be modified.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How should the ClickLoc connector be verified during installation?\u003c\/strong\u003e A: Ensure full mechanical engagement. Partial seating can introduce intermittent displacement readings due to unstable coaxial contact.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUse shielded coaxial cabling with the shield bonded at the proximitor end only to avoid ground-loop formation.\u003c\/li\u003e\n\u003cli\u003eMaintain proper bend radius on the FluidLoc cable to preserve impedance and reduce micro-motion noise.\u003c\/li\u003e\n\u003cli\u003eKeep cabling separated from high-voltage or high-frequency conductors to minimize electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eEnsure the 1\/4-28 UNF threaded section is fully seated in the mounting bracket for stable mechanical coupling.\u003c\/li\u003e\n\u003cli\u003eApply strain relief at the probe body to prevent connector movement under machine vibration.\u003c\/li\u003e\n\u003cli\u003eValidate gap voltage during commissioning; a stable -10 VDC bias indicates correct proximitor-probe matching.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43873405173834,"sku":"330901-00-36-10-11-05","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0587\/8569\/3770\/files\/1_52f7286d-4f21-495f-a242-96c7b4aca6f9.jpg?v=1748402684","url":"https:\/\/www.topbrandsplc.com\/products\/bently-nevada-330901-00-36-10-11-05-3300-nsv-proximity-probe","provider":"Topbrands PLC Limited","version":"1.0","type":"link"}