Allen-Bradley 2711P-RDK10C PanelView Plus 1000 Display Module

The Allen-Bradley 2711P-RDK10C is a replacement display module for PanelView Plus 1000 and PanelView Plus CE 1000 operator terminals. This module combines a 10.4-inch VGA color display with an integrated keypad operator interface, enabling restoration or maintenance of existing HMI systems without replacing the complete terminal assembly.

Technical Specifications

Display and Operator Interface

The module features a 10.4-inch color active-matrix TFT display with VGA resolution of 640 x 480 pixels. This display format provides compatibility with PanelView Plus 1000 applications designed for the original terminal platform.

A dedicated keypad interface is integrated into the module, allowing operators to navigate screens, acknowledge alarms, enter data, and perform machine control functions through physical keys rather than a touchscreen interface.

Compatibility

The 2711P-RDK10C is designed for use with PanelView Plus 1000 and PanelView Plus CE 1000 logic modules. It serves as a replacement display assembly for compatible terminal configurations and must be matched with the appropriate logic module version.

When servicing an existing terminal, users should verify the complete terminal catalog number and display configuration before selecting a replacement module.

Installation Considerations

The display module mounts directly to the associated PanelView Plus logic module and front enclosure assembly. Because the display and logic sections operate as a single terminal system, replacement procedures should follow the applicable maintenance documentation for the terminal model.

Removal and installation are not supported while power is applied. The terminal must be completely powered down before disconnecting or installing the display module.

Environmental Protection

When properly installed in the terminal enclosure, the module supports NEMA Type 12, 13, and 4X environmental ratings, as well as IP65 or IP54 protection depending on the specific installation configuration.

These ratings help protect the operator interface from dust, washdown exposure, and industrial contaminants commonly encountered in factory automation environments.

Product Lifecycle Status

The 2711P-RDK10C has been discontinued by Rockwell Automation. Existing installations may continue to operate and be maintained with available replacement stock, repaired assemblies, or migration solutions suitable for the installed PanelView Plus platform.

For upgrade projects, compatibility between the existing application and any replacement HMI platform should be reviewed before migration.

Frequently Asked Questions

Q: Is the 2711P-RDK10C a complete HMI terminal?

A: No. The 2711P-RDK10C is a display module intended for use with compatible PanelView Plus 1000 and PanelView Plus CE 1000 logic modules.

Q: What type of operator input does this module provide?

A: This version uses a physical keypad interface for operator interaction and navigation.

Q: Can the display module be replaced while the terminal remains energized?

A: No. Removal and installation under power are not supported. The terminal must be fully powered down before service work is performed.

Q: What display resolution does the module provide?

A: The module uses a 10.4-inch color TFT display with a VGA resolution of 640 x 480 pixels.