Allen Bradley 1756-L82E ControlLogix 5580 Controller
Configured for deterministic control execution in ControlLogix 5580 architectures, the Allen Bradley 1756-L82E (1756-L82E controller module) provides direct CPU processing, EtherNet/IP communication, and backplane coordination for high‑density I/O systems.
Hardware Specifications
| Parameter |
Specification |
| Model |
1756-L82E |
| Brand |
Allen Bradley |
| Origin |
Not specified |
| Weight |
approx. 0.394 kg |
| Dimensions |
Not specified |
| Operating Temp |
0 deg C to +60 deg C (Series C), 0 deg C to +50 deg C (Series B) |
| Power Consumption |
6.2 W |
| Core Performance Indicators |
128,000 digital I/O max; 4000 analog I/O max; 4 GB SD nonvolatile storage |
Profinet / EtherNet/IP Deterministic Networks
The 1756-L82E integrates deterministic EtherNet/IP scheduling through its embedded communication interface. Backplane bus communication velocity is maintained under high I/O loading, ensuring predictable scan cycles across distributed architectures. Firmware flash compatibility aligns with ControlLogix Series B and Series C chassis, allowing stable operation across 1756-A4 through 1756-A17 frames. I/O density scaling is supported through coordinated backplane arbitration, preventing bandwidth saturation during peak cyclic updates.
Frequently Asked Questions
Q: Can the 1756-L82E be hot-swapped in a powered ControlLogix chassis A: CPU modules require the chassis to be de‑energized before removal or insertion to maintain backplane integrity and avoid controller fault states.
Q: Does the controller support redundant power supplies A: Yes. It is compatible with 1756-PA75R, 1756-PB75R, and 1756-PSCA2 redundant supply families.
Q: Are firmware updates backward-compatible across chassis revisions A: Firmware must match the controller’s major revision branch. Cross‑revision loading may be rejected by the module.
Field Installation Guidelines
-
Maintain proper alignment when seating the controller to avoid bent backplane pins.
-
Route Ethernet cabling according to IEC 61918 and IEC 61784‑5‑2 to ensure signal integrity.
-
Keep USB wiring within wire category 3 practices and avoid permanent USB connections.
-
Separate high‑voltage conductors from communication wiring to reduce conducted RF interference.
-
Ensure adequate ventilation around the controller to dissipate its 21.2 BTU/hr thermal output.
Topbrands PLC Limited is a top supplier of genuine new PLC and DCS parts, serving over 50 countries globally. We offer high-quality products from renowned brands like Bently Nevada, Honeywell, ABB, and more. With our warehouse in China stocking up to 30,000 pieces, we ensure rapid delivery to meet urgent order needs while maintaining competitive pricing to save our customers' budgets. Learn more...
Contact Information