Allen-Bradley 2711P-RAAT15 PanelView Plus 7 Touch Screen Adapter Kit

Configured for HMI migration projects within Allen-Bradley visualization platforms, the Allen-Bradley 2711P-RAAT15 (2711P-RAAT15 PanelView Plus 7 Touch Screen Adapter Kit) provides a mechanical mounting interface for installing newer 15-inch operator terminals into existing enclosure cutouts. The adapter kit enables direct panel conversion without modifying the original cabinet opening, supporting upgrade paths between legacy PanelView products and newer PanelView Plus 7 or PanelView 5000 platforms.

Hardware Specifications

HMI Migration and Panel Compatibility

The 2711P-RAAT15 is designed to simplify modernization of existing operator interface installations by allowing new display terminals to utilize legacy enclosure cutouts.

Compatible legacy panel openings include:

• PanelView Plus 1500 Touch Terminals

• PanelView Plus 6 1500 Touch Terminals

• PanelView Standard 1400 Touch Terminals

The adapter allows installation of newer operator interfaces while preserving existing panel cutouts, reducing enclosure modification requirements during upgrade projects.

Mechanical Retrofit Design

The adapter plate is intended for installations where replacement of an existing HMI would otherwise require cutting, drilling, or reworking of the enclosure faceplate.

Supported target terminals include:

• PanelView Plus 7 Performance 15 in Touch Terminals

• PanelView 5500 15 in Touch Terminals

• PanelView 5000 15 in Touch Terminals

The mechanical interface maintains proper mounting geometry between legacy and replacement terminal families while supporting specified panel sealing requirements when installed according to manufacturer guidelines.

Frequently Asked Questions

Q: Does the 2711P-RAAT15 contain a display, touchscreen, or communication electronics?
A: No. The unit is a mechanical adapter kit designed for HMI mounting conversions and does not contain active electronic components.

Q: Can the adapter be used to upgrade from older PanelView terminals to PanelView Plus 7 displays?
A: Yes. The adapter is intended to accommodate installation of compatible 15-inch PanelView Plus 7 terminals into existing legacy cutouts.

Q: Is enclosure modification required when using the adapter kit?
A: The adapter is designed to utilize existing panel openings, reducing or eliminating the need for recutting enclosure surfaces.

Field Installation Guidelines

• Verify compatibility between the existing enclosure cutout and the intended replacement terminal.

• Inspect the enclosure mounting surface for flatness and mechanical damage before installation.

• Ensure all mounting holes align with the adapter plate before tightening hardware.

• Apply the specified mounting torque of 3.90 N m to maintain proper sealing performance.

• Confirm gasket placement and panel sealing surfaces are clean and free of debris.

• Check terminal clearance behind the enclosure before installation.

• Perform final inspection of mounting hardware and enclosure integrity after installation.