ABB 3HNE00133-1 Teach Pendant Extension Cable

ABB 3HNE00133-1 Teach Pendant Extension Cable

The ABB 3HNE00133-1, also cataloged as the Teach Pendant Extension Cable, operates as a 19‑pin extension harness for TPU devices, extending operator reach in ABB S4, S4C, and S4C+ robot controller systems.

Hardware Specifications

Profinet / EtherNet/IP Deterministic Networks

Within ABB controller systems, the 3HNE00133-1 cable supports Profinet and EtherNet/IP deterministic networks indirectly by ensuring stable TPU connectivity. The 19‑pin interface maintains deterministic communication cycles between operator pendant inputs and controller logic, preventing latency or signal distortion during robotic programming.

Frequently Asked Questions

Q: Can the extension cable be hot‑plugged during controller operation? A: Yes, the TPU extension cable can be connected or disconnected while the controller is powered, as it carries low‑level pendant signals.

Q: Is the cable interchangeable with shorter TPU cables? A: Yes, the 10 m extension can replace or extend shorter pendant cables, provided the connector type matches.

Q: What is the maximum supported controller generation? A: The cable is designed for ABB S4, S4C, and S4C+ systems; newer IRC5 controllers use different pendant interfaces.

Field Installation Guidelines

• Ensure connector alignment when mating the 19‑pin plug to avoid bent pins.
• Route cabling away from high‑voltage lines to minimize EMI.
• Use proper strain relief to prevent mechanical stress on connectors.
• Verify pendant operation after installation to confirm signal integrity.
• Store in dry, non‑condensing environments to preserve insulation quality.