Schneider XBTF024610 Magelis Graphic Terminal

Configured for complex graphical visualization and machine operator control within the Telemecanique Magelis platform, the Schneider XBTF024610 (XBTF024610 Graphic Terminal) provides direct physical/electrical execution.

Hardware Specifications

Industrial Control and Operator Visual Interface

Industrial graphic terminals serve as the primary human-machine interface (HMI) for real-time monitoring and parameter adjustment across automated plant processes. The XBTF024610 utilizes a high-contrast 10.4-inch TFT display driven by a dedicated processor to render industrial schematics, alarm tables, and trend curves. Industrial function keys allow tactile feedback for critical operator commands in environments where touchscreen operation is unsuitable, while embedded Ethernet (TCP/IP) and PCMCIA expansion options maintain multi-protocol communications with Modicon PLCs and plant network architectures.

Frequently Asked Questions

Q: What programming software is required to configure and download applications to the XBTF024610?

A: The XBTF024610 terminal is programmed using Schneider Electric XBT-L1000 or XBTL1003 HMI configuration software via the serial or Ethernet port.

Q: Can the PCMCIA slots be used for recipe and historical data storage?

A: Yes. The onboard PCMCIA type II slots support memory extension cards for expanded storage of alarm logs, historical trend data, and machine recipe parameters.

Field Installation Guidelines

• Cut a precise 360 mm x 260 mm panel cutout in the enclosure door, ensuring the surrounding surface is flat and free of burrs.

• Verify the IP65 sealing gasket is properly seated around the rear bezel before inserting the terminal into the panel cutout.

• Secure the terminal into position using the supplied screw clamps, tightening uniformly to achieve an airtight front-panel seal.

• Connect 24 VDC supply power to the removable terminal block, observing strict polarity and providing an external 2 A slow-blow fuse.

• Ground the chassis terminal directly to the enclosure single-point ground bus using a heavy braided copper strap to prevent electrostatic discharge issues.